How do I set Door Keeper's stops?

Your door must be closed. Put the battery in the engine. You now have 30 seconds to calibrate by following the procedure below.

1. Press 3s on the center button.
2. Position the lock in a locked position
3. Validate by pressing 3s on the center button. You'll hear a Confirmation Beep.
4. Position the lock in an unlocked position.
5. To finalize your calibration, follow one of the operations below depending on whether or not a handle is outside the door.

A - You have an EXTERIOR HANDLE

• The engine simply locks the door, the opening is done using the handle.
• Press 3s and release after the first Beep.

B - NO OUTSIDE HANDLE

The engine unlocks and opens the door, retracting the pedestle for 3s. Press 5s and release after the first Beep.

Finally, the engine performs several cycles to confirm the settings. A white LED indicates the success of the procedure.  If you fail, please repeat the procedure from the beginning.