Press the touch-screen button corresponding to the location of the first device to be added.
Unless contraindicated, you will then need to verify each step in order to move on to the next.
Choose the icon which represents the product to be added:
Press the PROG button for 3 seconds on an RTS transmitter already paired with this product. The product should respond. Refer to the product manual if it's a gate or garage door control.
Press the touch-screen key corresponding to the arrow to pair the monitor with the product and proceed to the next step.
Press the touch-screen corresponding to the arrow to go back.
Press the touch-screen buttons corresponding to the commands and check the paired product's response.
If the carrier product responds correctly, press the touch-screen confirmation key .
If the carrier product does not respond, press the touch-screen non-confirmation key to repeat the previous steps.
If you pressed , the paired product is displayed on the right side of the home screen.
Repeat as many times as necessary to pair all RTS products to the V®350 monitor.